Paladin Boost is a solid state clean signal boost pedal offered by Fearsome Sound.
High frequency Charge Pump power supply technology means the on-board solid state chip circuitry is provided with dual (positive and negative) voltages - the optimum environment for audio applications.
Boost's high impedance input is designed to accept your instrument or pedalboard signal chain output.
The LED "power on" indicator changes from Green to Red when you switch Boost into bypass mode.
Controls provided:
Volume - low impedance output level control designed to drive the input of an instrument amplifier or the unbalanced input of an audio board or computer recording interface with a clean, boosted signal.
The Tone Stack
The passive tone stack provides control of treble and bass boost and cut. The Tone Stack has essentially no effect on your signal when the controls are in the 12 o’clock position.
The Enclosure
Paladin Boost is housed in a Hammond 1590BB2 enclosure (470mm x 370mm x150mm). The Finish is black graphics on natural aluminum.
Boost Power Requirements
Boost requires a typical Stompbox 9vdc center negative voltage supply - either a dedicated wall wart or a power line from your multi tap pedal board power supply. Paladin Boost is not battery powered.